Synergy Testing House LLP

Dynamic load tests also known as PDA measurements are fast and reliable way to acquire information regarding piles geotechnical capacity and integrity. Based on PDA measurements a site-specific end of drive criteria can be determined for the equipment used to install piles.

The overall goal of conducting load tests on the Bridge is to : Quantify its response to various loading conditions. Measuring roadway-surface deflections due to various live loads. Deriving stresses from measured deflections via analytical models, and comparing analytical results with design standard.

The testing is required to determine the serviceability of the structure when the presence / effect of the strength deficiency and its remedial measures are not fully known or when the required dimensions and material properties for analysis are not available.

Bridge Load Testing evaluates the structural performance and load-carrying capacity of bridges by applying controlled static or dynamic loads. The test verifies design assumptions, identifies distress or excessive deflection, and ensures safety before commissioning or during service life.

Building Load Testing verifies the structural adequacy of slabs, floors, and buildings by applying test loads.

Applications:

• Change of building usage

• Structural safety certification

• Renovation or retrofitting

Dynamic Load Testing applies time-varying or cyclic loads to structures to evaluate real-life performance.

Used For:

• Bridges and foundations

• Pile integrity and capacity assessment

• Seismic and vibration analysis

Load Deflection Testing measures the deflection behavior of beams under applied loads, validating structural performance.

Applications:

• RCC and steel beams

• Structural health assessment

• Proof load testing